Monday, September 30, 2013

greenhouse roof (greenhouse post #9)

starting out the day, only the very side end pieces of the roof rafters are attached
 photo 3d7c30db-2086-4fab-a78d-a7fa5859a8ab_zps885fbf5a.jpg

 photo 777a66e7-22ae-4285-a601-0d304b8eccff_zpsb7fe5f98.jpg

view from the south east. the sheet of plywood inside is for the roof.
 photo 131d3b7e-fe83-4c9e-8a09-b971948a777f_zpsb5504d8c.jpg

chopsaw setup, cutting the remaining roof rafters to length
 photo 69cea75d-ce86-48bb-85fe-ee67368bcc96_zps5180bf7b.jpg

roof rafters installed
 photo e2064f83-6086-4df3-9e66-26ef8bfbb84a_zps2dcdf83c.jpg

the lip that keeps the roof glass from sliding off
 photo 92ead7e0-cbcf-4e63-8429-6ee094563859_zpsdd582b49.jpg

roofing rubber cut into strips and stuck on to the rafters where the glass will rest
 photo a831b3b3-0330-4258-ade8-15d462199cc1_zps326afba9.jpg

 photo b9bc478b-a62b-4d48-87c8-ba423b5231e3_zpsfe297ec3.jpg

glass goes up on the roof
 photo 3e1d65b4-7f83-419c-8673-8510cc458ac0_zps81bff3c4.jpg

 photo bc977939-b1c8-4c3e-8fa0-c9463b6a769f_zps3c6e8c21.jpg

 photo 92e21a81-8ba7-416a-98c3-363b08200b43_zps23b450dd.jpg

the sheet of painted OSB is cut and put in place, leaving a small opening in the far corner
 photo 18cfa2f6-57df-4fb4-b44b-ef49c0858b6c_zps2fc0fcb8.jpg

No comments:

Post a Comment